|
MEDIUM
CAPACITY SLINGERS FOR STOCKPILES
The medium capacity jet slinger shown here is suitable for slinging
grain, woodchips, salt, sugar, coal and fertilisers of rates
in the range of 100TPH to 500TPH.
|
 |
DESIGN
FEATURES
This machine incorporates all of the Techniplan innovations to
slingers such as the quick belt change facility, constant belt
length and tension under all trajectory angles, and correct loading
geometry independent of luff angle. This jet slinger has been
designed to allow the endless belt to be replaced with minimum
dismantling of the machine, and without the need for cranes. The
machine jacks itself apart for belt changing by means of hydraulic
cylinders. Belt changeover can be carried out within an hour by
two men working on the integral platform.
The jet slinger incorporates a ball bearing slewing ring for smooth
slewing motion. Directional adjustments are controlled by geared
brake motor driving through a pinion onto the slew ring gear.
Luff angle is controlled by hydraulic cylinders.
Electric screws jack can be incorporated as an alternative. Independently
free wheeling large diameter deflector sheaves are used to enhance
belt tracking. The slinger has an integral body and chute, which
can be lined with a variety of wear resistant materials.
Other options available are stainless steel pulleys, bypass chute
and electrical cable feeding devices.
Techniplan also manufactures small portable slingers of capacity
50-100TPH as well as high capacity slingers up to 1000TPH. |
SPECIFICATIONS
Slinger: Techniplan Medium Capacity
Materials: Grain, woodchips, sugar, salt, coal, fertiliser.
Capacity: 100TPH - 500TPH
Belt Width: 800 mm
Belt Speed: 22-26 m/sec stockpiling
(12-18 m/sec ship loading)
Luff Angles: 45 to zero
Installed Power: 22-45 KW
|
 |
INNOVATIVE
QUICK BELT CHANGE FACILITY
These jet slingers incorporate an innovative solution for the
quick change-over of conveyor belts. These machines have been
specifically designed to allow the endless belt to be replaced
with minimum dismantling of the equipment and without the need
for cranes. The trajectory luff mechanisms are used to lower the
slinger into the change-over position. Belt change-over can be
effected by two men in under an hour.
MODERN DESIGN
These machines are used for continuous stockpiling of woodchips.
Unique design features include constant belt length and tension
and well as correct feed geometry under all angles of luff. The
slinger incorporates a ballbearing slewing ring and has individually
rotating hold down rollers. The integral jet slinger main body
and feed chute is constructed from stainless steel for long life.
SPECIFICATIONS
Material: Woodchips
Capacity: 900 tph
Belt speed: 21.9 mlsec
Luff Angles: 45' to zero
Installed power: 75 KW. |
|
 |
Techniplan
Jet slinger in operation on woodchips. This machine is the third
unit supplied to a woodchip exporter on the South Coast of New
South Wales.
Capacity 1100 tph
Machine weight 3.5 tonnes
Installed power 75 KW
Belt Speed 18 m/sec |
|
 |
This
is a Jet slinger used for sugar loading. This slinger, installed
at Lautoka, Fiji ,has been in operation since 1995. Since building
this machine, Techniplan has built a sugar sling, in operation
at Mackay, Australia, with 2800 tph capacity.
The pictured
machine has the following specification:-
Capacity: 1000 tph
Belt speed: 16 m/sec
|
|
 |
This
Jet slinger in operation on Coal Stockpile.
This is one of the first of it's kind that
was internally lined with alumina tiles to reduce wear and
increase the streaming velocity of the product.
Capacity: 500 tph
Installed power: 55 KW
Belt Speed: 18 m/sec
Belt Width: 914mm |
|
 |
Techniplan
Jet slinger in operation on a shiploader in
NZ. This machine was supplied complete
with head chute, gimbal, telescopic chute and winch.
The first with Explosion proof protection on
electrical equipment. Twin 45kW motors are fitting with
Aluminium construction to reduce the wieght.
Capacity: 1500 tph
Installed power: 90 KW
Belt Speed: 18 m/sec
Belt Width: 1067mm
|
|
 |
This
Jet slinger is operational
on a shiploader with woodchip. This machine is the
second unit supplied to an
exporter in New Zealand.
Capacity: 1000
tph
Installed power: 75
KW
Belt Speed: 18 m/sec
Belt Width: 1067mm
|
|
 |
Techniplan
Jet slinger is operational
on a stockpile in a Central Queensland
minesite. This machine is mechanically
actuated with Screw Jacks as oppoed to the traditional hydraulic
cylinders.
Capacity: 600
tph
Installed power: 55
KW
Belt Speed: 18 m/sec
Belt Width: 914mm
|
|
 |
Techniplan Jet slinger in operation on woodchips
in Western Australia. This machine is the
first of it's kind to incorporate the cable
swing arm system, eliminating the need for a cable festoon
system. Mechanical actuation with screw jacks.
Capacity: 1200
tph
Installed power:
37 KW
Belt Speed: 18 m/sec
Belt Width: 1067mm
|
|
 |
Techniplan
Jet slinger in operation in South Africa.
This machine is the second unit
supplied with DIP/Explosion proof protection
and is used for both Woodchip and Grain
Capacity: 900tph
for Woodchip & 1100 tph for Grain
Installed power: 55
KW
Belt Speed:
12-14.5 m/sec
Belt Width: 1067mm
|
|
 |
Techniplan Jet slinger in operation on woodchips
in Tasmania. This machine was to
replace the existing slinger that had been damaged due to fallen
equipment.
Capacity: 1300tph
Installed power:
90 KW
Belt Speed: 16.5
m/sec
Belt Width: 1067mm
|
|
 |
Techniplan Jet slinger in operation on a
shiploader for mineral sands in Victoria.
Capacity: 1500tph
Installed power: 75
KW
Belt Speed: 14
m/sec
Belt Width: 1067mm
|
|
 |
Techniplan
Jet slinger in operation on a stockpile with
coal. This machine is lined with
Alumina tiles and came complete with trolley and rails.
Capacity: 850tph
Installed power:
90 KW
Belt Speed: 14
m/sec
Belt Width: 1067mm
|
|
 |
Techniplan
Jet slinger in operation on a minesite in NSW.
This machine is actuated by mechanical screw
jacks.
Capacity: 800tph
Installed power: 55
KW
Belt Speed: 12
m/sec
Belt Width: 914mm
|
|
 |
Techniplan
Jet slinger for stockpile on a minesite.
This machine incorporates two maintenance
platforms. This job is currently in
progress.
Capacity: 600tph
Installed power: 55
KW
Belt Speed: 16
m/sec
Belt Width: 914mm
|
|
